Florabest FKS 2200 D2 Instrukcja Użytkownika Pobierz pdf (Strona 60)

60

GB

and check the automatic lubrication and

chain brake function.

Note that the saw can re-oil.

Please note that the saw re-oils after use

and oil may leak out if it is stored on its

side or on the head. This is a normal

process due to the necessary ventilation

opening on the upper edge of the tank and

does not constitute a reason for complaint.

As each saw is checked during production

and tested with oil, a small residue may

be in the tank despite draining, which may

slightly dirty the housing with oil in transit.

Please clean the housing with a cloth.

Tensioning the saw chain

Regularly tightening the saw chain pro-

vides safety for the user and reduces and/

or prevents wear and chain damages.

Before the start of work and in approx. 10

minute intervals, we recommend the user to

examine the chain tension and correct it, if

necessary.

The chain warms up when working with

the saw and thus expands slightly. These

“expansions” can be expected especially

from newer chains.

Do not re-tighten or change the chain

when it is hot because it shrinks slightly

once it has cooled down. In case of non-

observance, this can lead to damages on

the guide rail or the engine because now

the chain is too taut on the blade.

Chain tension and chain lubrication have

a signicant impact on the service life of

the chain.

The chain is correctly tensioned if it does

not sag at the rail underside and can be

rotated completely around with the gloved

hand.

When the saw chain is tensioned with 9 N

(approx. 1 kg), the gap between the saw

chain and the guide rail may not be more

than 2 mm.

B

1. Ensure that the chain brake has

been released, that is, that the

chain brake lever (3) is pulled up

against the front grip (8).

2. Unscrew the fastening bolt (14).

3. To tighten the saw, turn the chain

adjustment ring (13) clockwise.

To loosen the tension, turn the

chain adjustment ring anti-clock-

wise.

4. Tighten up the fastening bolt (14)

again.

With a new saw chain, you must

readjust the chain tension after at

least 5 cutting operations.

Chain lubrication

The rail and chain must never be

without oil. If you operate the elec-

tric chainsaw with too little oil, the

cutting performance and the lifetime

of the saw chain is reduced, since

the chain becomes blunt faster. You

can identify a case of too little oil

where smoke development or dis-

coloration of the rail occurs.

As soon as the motor is speeded up, the oil

also ows faster to the chain bar (4).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 79 80

Komentarze do niniejszej Instrukcji

Brak uwag